Why Adding A Saab 93 Key Replacement To Your Lifes Routine Will Make The Impact

How to Replace the Replacement Key Battery For the Saab 9-3

Saab owners have to follow a series of steps that are unique to add an additional ignition key. This requires an electronic handheld computer, referred to as Tech-2, to be used by the dealer. Then, a new transponder and key have to be purchased.

It is a good idea to rotate your keys so that one doesn't wear out faster than the other. This will help to keep your keys in good condition.

Replacement Case

The new key fobs do not look like the older Saab keys. They feature electronic components that make them difficult to copy. That has made car theft significantly more difficult than it was twenty years ago. It has also made it more expensive to replace keys lost.

Saab 9-3 owners should have two keys working. If one is lost it costs a lot to replace it in the vehicle because it requires replacing the CIM module and programming the locking cylinders. Dealers usually charge between $100 and $200 to do this.

There are options to avoid the high cost. Some parts dealers will use the code of an extra key to cut a brand new metal blade at a fraction the cost of the dealer. The key must be exactly the identical to the original one for it to work in your vehicle.

saab car keys can also change the case yourself by following these steps. You will need a flathead screwdriver as well as some patience. With the screwdriver, slowly pry the plastic apart and separate the emergency keys from the case. Once you have the case open, remove the electronics and put them back into the new case. Insert the correct key and badge into the case.

Replacement Battery





The Saab 9-3 replacement battery is a budget part that can be quickly and easily replaced. The YouTube video of Cyclone Cyd shows how to replace the battery for the remote fob in only four steps. This tutorial will work with any modern Saab key fob. However, the process may differ slightly.

The first step is to locate the button that will release the backup key on the fob. It is usually located close to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This will allow you to open the fob's case so that you can replace the battery.

Once the new CR1632 battery is installed You can then reassemble the remote key fob, and then program it to your car. The whole process should take more than an hour at most. It is a simple process that does not require any special equipment.

If you lose your key, the process is somewhat more complex however it can be completed. The dealer has to first verify the VIN of the vehicle and order a replacement TWICE module and key blade that has the correct unique code. After that, they will have to cut the new key and then program it with an innovative software tool called MDI.

Replacement Key Fob

The key fob has batteries that are used to lock and unlock your vehicle. Batteries have a limited lifespan and will eventually die. It's a common issue for all vehicles. The good thing is that you can replace the battery on most key fobs, without having to replace the entire case. Amazon sells replacement fobs that already have all the electronics in place. You can simply open the case and replace the batteries. It's important to note that you will need to take out the emergency key first. you can do this by putting the screwdriver of a small flathead into the slot located in the middle of the case. The screwdriver should be moved around the case until it is split open, making it much easier to take it out.

If you're ready to replace your keys, keep an extra set on hand. This will save you a lot of money. If you have a spare, you can ask the dealer cut an additional key and program it into your car, which is much cheaper than replacing the whole key fob.

If you don't have a spare one, you can add a second key to your car, but this requires a lot of research and effort. The cost of adding a second key is several hundred dollars and it also requires programming of the car's computer. Professionals can accomplish this however it's a costly option.

Replacement Ignition

The current SAAB 9-3 is an alarm system that is more sophisticated built around a key code. This means that should you lose only one working key, acquiring another one could be very costly since the car needs to have a unique computer module installed and it must also be specifically programmed to accept an extra key. Even dealers can charge hundreds of dollars to program a new key if they are unable to complete the task.

Dealers will charge you a high price to replace your car computer (also known as the CIM or SAAB twice) If you lose your only functioning key. Instead, we can reprogram the EEPROM of your current car computer to prepare it for a new key, slashing over 50% of the amount you be charged at a dealership.

If you've been a long-time owner of a 03-11 SAAB 9-3, you likely have noticed that the ignition switch isn't all that durable. If your ignition key is not working properly, you should consider replacing it. They can become extremely sticky and the buttons have been known to fall off. The good news is that replacing the ignition key isn't as difficult as it sounds and can be done in a short time with the proper tools.