Choosing-a-Suited-LED-Driver-for-Your-LED-Strip-Lights

From World History
Jump to: navigation, search

Nowadays we are answering one more one particular of your FAQs, this time relating to the subject matter of LED Drivers.

As [httpswww.ukled.co.ukled-drivers.html LED Power supply] have voltage and existing specifications which are various to the mains power supply (240V AC), they require a independent device referred to as an LED Driver in get to function.

What is an LED Driver?

An LED Driver, often referred to as a transformer or electricity supply, is a self-contained electricity provide that matches its output to the voltage and existing requirements of the unit it serves. Operating on a similar foundation to the 12V transformers in MR16 highlight systems, the LED Driver requires the mains electrical energy source and modifications it to 12V DC.

Which LED Driver do I want?

Drivers come in a lot of styles and dimensions, and not all will be suitable for your purposes. When selecting a driver you must take into account the following:

-The electricity outlet you are using

-The dimension of your LED Strip Lights.

LED Drivers appear in two major kinds "plug and perform" and mains ready.

As the identify indicates, "plug and perform" motorists are developed for fast and simple set up, and demand minimal expertise to use. The driver connects to the mains provide through a normal British isles 3-pin plug and to the strip lights by means of corresponding male and female connectors.

Mains ready motorists are created for more advanced installations and can be hardwired right into your home mains, normally by way of a domestic house change for a entirely built-in lighting experience. An IP67 ratingalso can make them suitable for use in moist and moist conditions.

As nicely as the sort, you will also have to decide on a suitably sized driver. The size of the driver is calculated in watts and needs to be matched to the energy use, or "load," of your LED Strip Lights.

To calculate the load of your strip lights, multiply the wattage for each metre by the complete amount of metres you intend to operate off a one driver. This can be expressed as follows:

wattage for each metre x number of metres = whole electrical power consumption (load)

For instance, if you are using ten metres of LED Strip Light that consumes seven.2 watts for every metre, the complete load will be ten x 7.two = seventy two watts. In this specific illustration an one hundred watt driver will be enough.

Keep in mind, it is attainable to operate far more than 1 strip mild off a one driver. Often consult a skilled electrician just before trying any mains electrical perform.